WS2812 LEDS

25 LEDS IN THE PACKAGE WS2812B RGB LEDWS2812B is a intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components. It internal include int ...

CHARLIEPLEXING LEDS

CHARLIEPLEXING LEDSWhat is ‘Charlieplexing’? It is driving lots of LEDs with only a few pins. In case you’re wondering Charlieplexing is named after Charles Allen at Maxim who developed the technique. ...

RGB LED

RGB LEDIt is a simple project that uses an RGB LED to display different colours. It mixes the three primary colours (red, green and blue) to make seven colours. It is activated by a push button, and once activated goes throu ...

RELAY 5V

RELAY 5VBoard can be used for turning on/off lights, motors and other high power consumers within the maximum supported voltage/current levelsControl up to 5A, 250V AC/30V DC loads. Screw terminals allow secure connection of ...

10K POTENTIOMETER

10K POTENTIOMETERAn adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that v ...

MCP4161 DIGITAL POTENTIOMETER

MCP4161 DIGITAL POTENTIOMETERThe MCP41/424X devices are non-volatile, 8-bit (257 wiper steps) digital potentiometers with EEPROM and an SPI compatible interface. The MCP41/42XX family is available with end-to-end resistor va ...

PCA9685 LED CONTROLLER

PCA9685 16-CHANNEL,12-BIT PWM FM+ I2C-BUS LED CONTROLLERThe PCA9685 is an I2C-bus controlled 16-channel LED controller optimized for Red/Green/Blue/Amber (RGBA) color backlighting applications. Each LED output has its own 12 ...

BUZZER

BUZZERThe active buzzer has built-in electronics that produces the buzzer sound. For this reason it will sound when power is connected to it and does not need any external electronics or an Arduino for it to produce a sound. ...

ROTARY

ROTARY ENCODERThis is a 12-step rotary encoder with a nice ‘clicking’ feel. It’s breadboard friendly, and has a pretty handy select switch (by pushing in on the knob). The encoder is different from a potentiometer in that an ...

KEYPAD NAVIGASYON

KEYPAD NAVIGASYONTactile switches are standard input "buttons" on electronic projects.The pins are normally open (disconnected) and when the button is pressed they are momentarily closed.You can menu applications ...